RP Information RP Information RP Information RP Innovation RP Products RP Innovation RP Quality RP Service
Home Page RP Products RP News RP Company Info Upcoming Exhibits WWW Links
Product Rentals RP Jobs Send E-Mail to RP Search RP Site

VSCC PM-2.5 Fractionator

Rupprecht & Patashnick (R&P) is pleased to announce that on 2 April 2002 the United States Environmental Protection Agency (USEPA) granted a Class II Equivalency Designation (FEM) to the Partisol-Plus Model 2025 PM-2.5 Sequential Air Sampler (EQPM-0202-145) and the Partisol-FRM Model 2000 PM-2.5 Air Sampler (EQPM-0202-143). These new designations are for the aforementioned Partisol Air Samplers when configured with a BGI VSCC Very Sharp Cut Cyclone in lieu of a WINS Impactor.

The performance of the VSCC PM-2.5 fractionator is shown below in comparison with other PM-2.5 particle size fractionators:

R&P has cooperated closely with BGI, Inc., and the USEPA to provide this WINS replacement option for the Partisol-Plus Model 2025 PM-2.5 Sequential Air Sampler and Partisol-FRM Model 2000 PM-2.5 Air sampler (single channel). Customers who desire to use the VSCC fractionator in place of the WINS in these systems should order the "VSCC PM-2.5 Fractionator for R&P Samplers," R&P part number 57-008740. In order for these configurations to be considered a "USEPA Designated PM-2.5 Equivalent Method," the VSCC unit must be purchased from R&P. The VSCC separator is supplied with an FEM designation sticker (to be applied to the Partisol Air Sampler) and an R&P VSCC user manual.

 
Installation in Partisol-Plus Model 2025
Sequential Air Sampler
Installation in Partisol-FRM Air Sampler
(single event sampler)

The VSCC PM-2.5 fractionator alone does not imply any type of USEPA reference or equivalency status. R&P PM-2.5 FRM air samplers that the USEPA has designated as "USEPA Designated PM-2.5 Equivalent Method," when configured with the VSCC unit, may use the VSCC device in place of the WINS immediately. R&P is also offering the "VSCC PM-2.5 Fractionator for RAAS Samplers," R&P part number 57-008739. Note, however, that paperwork supplied to the end user through R&P will be required to be submitted to the USEPA to gain approval for the use of the RAAS air sampler with the VSCC fractionator under the "User Modification to Reference and Equivalent Methods" rules.

The following resources are available for downloading on the VSCC PM-2.5 Fractionator:

VSCC PM-2.5 Fractionator with Grit Pot Removed

- Apr 02 -

Back to News Page


RPCO.COM -- The on-line information source of Rupprecht & Patashnick Co., Inc.
Copyright © 1996-2003 Rupprecht & Patashnick Co., Inc. All rights reserved throughout the world.
Click here for trademark and intellectual property information.